JVC KD-S707R - Manual (Page 22)

22
1
Call up the sound mode you want to adjust.
See page 20 for details.
2
Select "BAS", "TRE" or "LOUD".
3
Adjust the bass or treble level or turn the
loudness function ON/OFF.
See page 21 for details.
4
Press and hold SOUND until the sound mode
you have selected in step 1 flashes on the
display.
Your setting is stored in memory.
5
Repeat the same procedure to store other settings.
To reset to the factory settings
Repeat the same procedure and reassign the preset values listed in the table on page 20.
Storing your own sound adjustments
You can adjust the sound modes (BEAT, SOFT, POP: see page 20) to your preference and
store your own adjustments in memory.
SOUND
Within
5 seconds
SEL
Within
5 seconds
Within
5 seconds
SOUND
2 3 1, 4