JVC TK-WD31 - Manual (Page 16)

10
Names and Operations of Parts
[Rear Panel]
SEE INST-
RUCTION
MANUAL
DC12V
AC24V 1 2
CLASS 2 ONLY (U TYPE)
ISOLATED POWER ONLY
(E TYPE)
POWER VIDEO OUT
INT LL
SET SELECTOR
8 [DC 12V, AC 24V] Power input terminals
To input DC 12V or AC 24V power.
9 [VIDEO OUT] Video signal output connector
This BNC connector outputs a composite video signal. Connect this
to the video input connector of a video monitor, switcher, etc.
0 [POWER] Power indicator lamp
This lamp lights when power is supplied to the camera.
INTRODUCTION
A
B
8
9
C
0