Jensen Hello Kitty KT7009A - Manual (Page 40)

40
Interference from other
USB devices Disconnected other
USB devices
Check computer Connect the
camera to the PC
with the USB cable
and select [My
Computer] –
[Control Panel] –
[System] – [Device
Manager]. In the
[Device Manager]
window delete
[Compose USB
device] or
[Unknown device]
in [Other devices].
Then disconnect
the camera and
install the software
again.
Camera
malfunctions during
use Electrostatic discharge
interfered with the
camera Check if the camera is
connected to the PC Turn off the camera
and then turn it
back on. If
connected to the
PC disconnect the
camera from the
USB cord, and turn
it off then on again.
The removable disk
crashes with the
network drive The camera is
detected by the
Windows and works
properly. But a driver
letter of the removable
disk is not created Driver is not installed
properly, or network driver
connection is crash Reinstall the driver,
or disconnect the
crashed network
driver and reserve
this drive letter for
the camera
No response from
any of the function
keys The LCD on camera
has frozen when insert
a SD card into the
camera SD card is first use and
not formatted Ensure you only
use a new or
Formatted SD card