Jonsered GC2236 - Manual (Page 27)

English – 27
TECHNICAL DATA
Technical data
Note 1: Noise emissions in the environment measured as sound power (L
WA
) in conformity with EC directive 2000/14/
EC.
Note 2: Equivalent sound pressure level is calculated as the time-weighted energy total for sound pressure levels under
various working conditions with the following time distribution: 1/2 idling and 1/2 max speed.
NOTE! The noise pressure level at operator’s ear and vibrations on the handles are measured with all the approved
cutting attachments for the machine. The table indicates the lowest and highest values.
Technical data GC 2236
Engine
Cylinder displacement, cm
3
34,6
Cylinder bore, mm 38,0
Stroke, mm 30,5
Idle speed, rpm 2900
Recommended max. fast idle speed, rpm 11500
Speed of output shaft, rpm 8920
Max. engine output, acc. to ISO 8893, kW/ rpm 1,6/8400
Catalytic converter muffler No
Speed-regulated ignition system Yes
Ignition system
Manufacturer/type of ignition system Walbro MB
Spark plug Champion RCJ 6Y
Electrode gap, mm 0,5
Fuel and lubrication system
Manufacturer/type of carburettor Zama C1Q
Fuel tank capacity, litre 0,6
Weight
Weight without fuel, cutting attachment and guard, kg 5,9
Noise emissions
(see note 1)
Sound power level, measured dB(A) 113
Sound power level, guaranteed L
WA
dB(A) 116
Noise levels
(see note 2)
Equivalent sound pressure level at the operator's ear,
measured according to EN ISO 22868, dB(A), min./max.:
97/98
Vibration levels
Vibration levels at handles, measured according to
EN ISO 22867, m/s
2
At idle, left/right handles, min.: 1,3/1,0
At idle, left/right handles, max.: 1,8/1,4
At max. speed, left/right handles, min.: 3,5/5,2
At max. speed, left/right handles, max.: 4,8/6,2