Menu configuration—main menu – JVC DT-V9L3D User Manual

Page 32

Advertising
background image

10

Menu Configuration—MAIN MENU

PICTURE IMPROVEMENT

Setting for the picture quality

Item

To do

Setting value

APERTURE*

Select the frequency of the luminance signal compensated in
“APERTURE LEVEL.”

OFF, LOW, HIGH

APERTURE
LEVEL
*

Compensate the frequency response of the luminance signal of the
video signal.

01 – 10

sub menu

Display the sub menu which enables you to adjust the items of “PICTURE IMPROVEMENT” while
viewing the actual picture.

reset

Restore the default settings for all the items in “PICTURE IMPROVEMENT.”

BACK LIGHT

Adjusts the brightness of the display.
• When the DYNAMIC lamp lights, this item does not appear on the menu (

☞ 8 on page 6).

FOCUS ASSIST

Helps to focus the picture.
• When “ON” is selected,

– “PICTURE IMPROVEMENT” is not displayed on the menu.
– The settings of “PICTURE IMPROVEMENT” are ineffective.

COLOR RANGE MODE

Reduces the difference of the luminance level specific to the LCD panel.
• When “ON” is selected, the color temperature becomes the innate temperature in the LCD panel, and the

setting of “WHITE BALANCE SET.” becomes ineffective (

☞ page 14).

VIDEO/COMPO. SEL.

Selects the signal type you want to use for the VIDEO/COMPONENT terminals.
• When select the component (COMPO.), make sure to set the component level in “COMPO. LEVEL” in

“PICTURE SUB ADJ.” (

☞ page 14).

ASPECT*

Changes the aspect ratio of the picture.

* Memorized for each input — composite signal input (VIDEO), component signal input (COMPO.), SDI 1 and SDI 2.

For the operation procedure, see page 7.

• The menu automatically disappears in about 30 seconds after the previous operation.
• Some items may not appear on the menu depending on the input or the input signal.
• The items controlled by the MAKE system do not appear on the menu.

Setting value: –20 – +20

Setting value: OFF, ON

Operation guide
Shows the buttons for
each operation.

Setting value: VIDEO, COMPO. (component)

Setting value: 4:3, 16:9

Setting value: OFF, ON

DT-V9L3D_J_en.indb 10

DT-V9L3D_J_en.indb 10

09.8.7 1:30:31 PM

09.8.7 1:30:31 PM

Advertising
This manual is related to the following products: