3 connecting the aerial and external devices, Connecting the aerial and vcr, Preparation – JVC AV-16N211 User Manual
Page 4: Video audio in out 1 2
4
Preparation
3 Connecting the aerial and external devices
• For further details, refer to the manuals provided with the devices you are connecting.
• Connecting cables are not supplied.
• The front and rear AUDIO/VIDEO input jacks are directly connected so that input to either
jack is output through both. You cannot provide input to both the front and rear jacks at the
same time. Disconnect one input, or use one of the jacks as an output jack only (for
monitoring or recording).
■ Connecting the aerial and VCR
VIDEO
IN
OUT
AUDIO
VIDEO AUDIO
IN
OUT
1
2
Indoor aerial
VHF/UHF outdoor aerial
Rod aerial
Matching aerial adapter
(supplied)
Aerial holder
(1)
(2)
(3)
Install into the top-rear aerial holder. Once installed, it cannot be removed.
To install rod aerial:
Connecting the aerial
• Illustration of AV-21Y211
VIDEO
IN
OUT
AUDIO
To RF
output
To video
output
To aerial input
To audio
output
3
2
VCR
VHF/UHF outdoor aerial
1
Connecting the aerial and VCR
• Illustration of AV-21Y211
GGT0010-21Y211-E501
22/08/2003, 17:22pm
4
Black