En g li sh – Jabra BT8040 User Manual

Page 12

Advertising
background image

0

EN

g

Li

Sh

JABrA BT8040 BlUETooTh STErEo hEADSET

I am having pairing problems
• you may have deleted your headset pairing connection in your

mobile phone.

Follow the pairing instructions.
I want to reset the headset
It is possible to reset and test the headset by ’Pressing and hold-

ing’ all three buttons at the same time. The red, blue, and green

lights will light up in a white light. In this mode, the pairing list is

reset, and you can test if the headset works, as you will be able to

hear audio in the speaker from the microphone.
The headset will automatically turn off after approx. 0 seconds.

The next time you power on, the headset will go into pairing

mode just like the first time you powered on your new BT8040.
Will the Jabra BT8040 work with other Bluetooth equipment?
• The Jabra BT8040 is designed to work with Bluetooth mobile

phones. It can also work with other Bluetooth devices that are

compliant with Bluetooth version . or higher and that sup-

port a headset, hands-free, and/or advance audio distribution

profile.

I cannot use reject call, call on hold, redial, or voice dialing
These features are dependent on the ability of your phone to sup-

port a hands-free profile. Even if the hands-free profile is imple-

mented, the reject call, call hold, or voice dialing are all optional

features that are not supported by all devices. Please consult your

device manual for further details.
Please note that some features can only be operated from the

primary device e.g. voice dial using Jabra BT8040 with 2 mobile

phones.
The device does not connect to my headset in time to answer

an incoming call
If the headset is off and is turned on when a call is incoming, the

device and headset might not connect in time for the call to be

answered. In order to avoid such inconveniences please keep the

headset on, in range, and connected.

Advertising