JVC 0405TNH-II-IM - Manual (Page 52)

52
Initial Setup
The DIGITAL-IN option can only be displayed in the INITIAL SETUP menu when a 480p picture
signal is being input to the DIGITAL-IN terminal. This option adjusts the position when a 480p
picture signal is being displayed on the screen. There are two types of 480p picture signals:
640x480 and 720x480. If the displayed picture is slightly shifted, the position can be adjusted
by selecting either SIZE1 or SIZE2.
Press the M ENU button
π† To DIGITAL-IN
è To enter
π† To select AUTO, SIZE1 or SIZE2
Press the M ENU button to finish
Notes:
• The DIGITAL-IN menu can only be displayed when a 480p picture signal is input to the
Digital-In terminal and the picture is being displayed on the screen.
• You can select AUTO only when the signal is 480p for HDMI. When you select AUTO, the
televison will select "SIZE1" or "SIZE2" automatically.
Digital-In
INITIAL SETUP
SELECT OPERATE EXIT MENU
NEXT PAGE
PREVIOUS
(1/5)
VIDEO-1MONITOR OUT
DIGITAL-IN
DIGITAL-IN AUDIO
OFF
SIZE1
DIGITAL
This feature is used if you have a DTV or HDMI
compatible component connected to your TV.
Press the M ENU button
π† To DIGITAL-IN AUDIO
√® To select “ANALOG”, “DIGITAL” or "AUTO"
Press the Menu button when fi nished
Notes:
• If your DTV or HDMI component is capable of digital audio and video, choose DIGITAL. If
your DTV or HDMI component is capable of analog audio and digital video, choose ANALOG.
• Refer to your DTV or HDMI component’s instruction manual for more information.
• When you select DIGITAL, select PCM on Digital Sound in the Digital Setup menu. See page
71.
• When you select AUTO, the television will select "ANALOG" or "DIGITAL" automatically,
depending on the audio input from the HDMI.
Digital-In Audio
INITIAL SETUP
SELECT OPERATE EXIT MENU
NEXT PAGE
PREVIOUS
(1/5)
VIDEO-1MONITOR OUT
DIGITAL-IN
DIGITAL-IN AUDIO
OFF
SIZE1
DIGITAL
LCT1881-001A-A ENG 52 4/26/05, 9:40:07 AM