John Deere ET-3402-J - Manual (Page 10)

10 7 1/4 Inch Circular Saw Operator's Manual
LOWER GUARDS
Raise lower guard with the retracting handle (Lever).
ADJUSTMENTS
Before cutting be sure depth and bevel adjustments are tight.
USE ONLY CORRECT BLADES IN MOUNTING
Do not use blades with incorrect size holes.
Never use defective or incorrect blade washers or bolts.
AVOID CUTTING NAILS
Inspect for and remove all nails from lumber before cutting.
POLARIZED PLUGS
To reduce the risk of electric shock, this equipment has a polarized plug (one blade is
wider than the other).
This plug will fit in a polarized outlet only one way.
If the plug does not fit fully in the outlet, reverse the plug.
If it still does not fit, contact a qualified electrician to install the proper outlet.
Do not change the plug any way.
CAUTION