Playback, Basic playback, Playback features – JVC HR-J695U User Manual

Page 8: Adjusting tracking condition — tracking adjustment, Selecting monitor sound — audio monitor

Advertising
background image

Playback

Basic Playback

A

Load a cassette

Make sure the window side is up, the rear label side is facing you
and the arrow on the front of the cassette is pointing towards the
VCR.

● Do not apply too much pressure when inserting.

● The VCR turns on, and the counter on the on-screen display is

reset, automatically.

● If the cassette’s record safety tab has been removed, playback

begins automatically.

B

Start playback

Press PLAY (

4

).

Playback Features

Adjusting tracking condition
— Tracking Adjustment

Automatic tracking adjustment
Whenever you insert a tape and start playback, automatic tracking
starts working and continuously analyzes the signal to enable
optimum picture quality during playback.
Manual tracking adjustment
If automatic tracking cannot eliminate noises well during

playback, follow the procedures below.

A

Press SP/EP on the Remote during playback to activate manual

tracking.

B

Press CH + and to eliminate the noises. Press it briefly for a

fine adjustment, or press and hold for a coarse adjustment.

Press SP/EP on the Remote again to reactivate automatic

tracking.

Selecting monitor sound
— Audio Monitor

While playing back a tape on which stereo sound or SAP sound is
recorded, press A. MONITOR on the Remote. Each time you press
the button, sound changes.
HI-FI

: Normally select this. Hi-Fi sound is played back.

HI-FI L

: Sound on the left Hi-Fi channel is played back.

HI-FI R

: Sound on the right Hi-Fi channel is played back.

NORM

: Sound on the normal track is played back.

NORM HI-FI

: Both sounds on the Hi-Fi track and normal track are

mixed and played back.

NOTE:

The above indication appears when “SUPERIMPOSE” is set to
“ON”, though the monitor sound changes in sequence.

Automatic operations after rewinding
— Next Function Memory

The Next Function Memory “tells” the VCR what to do after
rewinding is complete. Ensure that the VCR is in stop mode.

For Automatic Playback Start
Press REW (

3

), then press PLAY (

4

) within 2 seconds.

For Automatic Power Off
Press REW (

3

), then press POWER within 2 seconds.

For Automatic Timer Standby
Press REW (

3

), then press TIMER within 2 seconds.

NOTE:

It is not possible to select the Automatic Timer Standby function if
the cassette’s record safety tab is removed.

During playback

Stop playback

Press STOP (

8

) on the

Remote.

OR Press STOP/EJECT (

0

) on

the VCR.

Pause playback and view still picture

Press PAUSE (

9

).

● Press PLAY (

4

) to resume normal playback.

NOTE:

During still picture, vertical vibration might appear on the TV
screen. Use the CH+/- to get a clearer picture. However, the VCR
will return to the default setting once a power failure occurs.

Pause and Frame-by-Frame playback

Press PAUSE (

9

) to pause, then press

2

or

6

(or PAUSE (

9

))

repeatedly.

● Press PLAY (

4

) to resume normal playback.

High speed search

Press REW (

3

) or FF (

5

).

● Press PLAY (

4

) to resume normal playback.

● If you press and hold REW (

3

) or FF (

5

) for more than

2 seconds, simply releasing it cancels the picture search, and
normal playback resumes.

Picture search at variable speed (including slow-motion)

Press

2

or

6

repeatedly.

● Press PLAY (

4

) to resume normal playback.

● Each time you press

2

or

6

, the playback speed changes.

To decrease the speed during picture search, press the opposite
direction button repeatedly.

● During still picture, press and hold

6

to start forward slow

motion playback (or

2

to start reverse slow motion

playback). When you release the button, still picture resumes.
During still picture, holding PAUSE (

9

) for more than

2 seconds also starts forward slow motion playback. If you
press PAUSE (

9

) again, still picture resumes.

NOTE:

During slow motion picture, some noise might appear on the TV
screen. Use the CH+/- to eliminate the noise. However, the VCR
will return to the default setting once a power failure occurs.

When the tape is not running

Rewind/fast-forward

Press REW (

3

) or FF (

5

).

Eject the tape

Press STOP/EJECT (

0

).

● You can also eject the cassette when the VCR is turned off.

Turn off the VCR

Press POWER (1).

Reverse

Forward

Reverse

search

3 steps

Reverse

play

Reverse

slow

motion

2 steps

Slow

motion

2 steps

Normal

play

Forward

search

4 steps

Advertising