Jwin JV-TV2040 - Manual (Page 8)

-8-
B
ASIC
O
PERATIONS
These simple steps will enable you to get the best quality sound and image on
your closed circuit monitor.
1. Push the power ON/OFF button.
The power indicator light comes on.
2. Open the control panel.
3. Move the function switch to position
“CH1” or “CH2” or Auto.
Note:
ƒ Use CH1 or CH2 when using
only 1 camera.
ƒ Use Auto when you want to use 2
cameras and switch views
according to your time setting.
ƒ Select the auto switching time.
ƒ Don’t forget to remove the
camera lens cover.
4. Set the volume
ƒ To increase volume, turn the
volume knob (found on the left
side of the unit) toward you.
ƒ To decrease volume, turn the
volume know away from you.
5. Adjust brightness, contrast, and V-
Hold to improve the image.
Power ON/OFF Button
Volume Control
Power Indicator Light
Brightness Control
Contrast Control
V-Hold Control
CH1/CH2/AUTO switch
Time Selector
Control Panel Door