Finding the beginning of a tune, Other convenient tape functions, Skipping the blank portions on the tape – JVC GET0063-001A User Manual

Page 10

Advertising
background image

10

ENGLISH

Finding the beginning of a tune

Multi Music Scan allows you to automatically start
playback from the beginning of a specified tune.
You can specify up to 9 tunes ahead of or before
the current tune.

During playback

Specify how many tunes ahead of or
before the current tune the one you want
is located.

Each time you press the buttons, the number
changes up to ±9.
When the beginning of the specified tune is
located, playback starts automatically.

Notes:

• While locating a specified tune:

– If the tape is rewound to its beginning, playback

starts from the beginning of that side.

– If the tape is fast-forwarded to the end, it is

reversed and played from the beginning of the
other side.

• In the following cases, the Multi Music Scan

function may not operate correctly:
– Tapes with tunes having long pianissimo passages

(very quiet parts) or non-recorded portions between
tunes.

– Tapes with short non-recorded sections.
– Tapes with high level of noise or humming between

tunes.

– Tapes with tunes recorded at low recording levels.
– The Dolby NR setting does not match. For

example, if Dolby B NR is on and the tape was
recorded with no Dolby NR. (Only for KS-FX711)

Press

¢

to locate a tune

ahead of the current tune on
the cassette.

Press

4

to locate a tune

before the current tune on the
cassette.

Other convenient tape functions

Skipping the blank portions on the tape

You can skip blank portions between the tunes
(Blank Skip).
When this function is on, the unit skips blank
portions of 15 seconds or more, fast-forwards to
the next tune, then starts playing it.

1

Press and hold SEL (select) for more
than 2 seconds.

“CLOCK H,” “CLOCK M,” “SCM LINK,”
“LEVEL,” “B. SKIP” or “EXT IN*” appears on
the display.

* Displayed only when one of

the following sources is
selected — FM, AM and
Tape.

2

Press

¢

or

4

to select

“B. SKIP (blank skip).”

3

Press + to select “ON.”

Now Blank Skip is activated.

4

Finish the setting.

To cancel Blank Skip, repeat the same procedure
and select “OFF” in step 3 by pressing –.

S E L

CLOCK H

CLOCK M

LEVEL

SCM LINK

EXT IN

B. SKIP

S E L

4

¢

4

¢

EN09-11KS-FX711/KS-FX511[U]f

3/1/02, 9:52

10

Advertising