JVC GET0188-001A - Manual (Page 9)

9
ENGLISH
Setting the clock
1
Press and hold SEL (select) for more
than 2 seconds so that one of the
PSM item appears on the display.
(PSM: see page 25 and 26.)
2
Set the hour.
1 Select “CLOCK H” (hour) if not shown on
the display.
2 Adjust the hour.
3
Set the minute.
1 Select “CLOCK M” (minute).
2 Adjust the minute.
4
Finish the setting.
To check the current clock time or change the
display mode
• During tuner operation:
• During disc operation:
Notes:
• If a name has been assigned to a station, it will be
shown instead of "NO NAME".
• While playing a conventional CD, “NO NAME”
appears for the disc title/performer and the track title.
• For indication change while playing a CD Text or
an MP3/WMA disc, see also pages 16 and 19.
• During external component operation:
• During power off:
The power turns on and the clock time is
shown for 5 seconds, then the power turns off.
Press DISP (display) repeatedly.
Each time you press the button,
the display changes as follows:
LINE IN Clock
EN07_09_KD_SC605[U].P65 11/4/03, 2:11 PM 9