JAMO S 502 - Manual (Page 12)

12
TV TYPE
Choose between Multi System (the connected TV is compat-
ible with both NTSC and PAL), NTSC and PAL video output
from the S DVR 52.
The default setting should be appropriate for your region
- changing it may result in poor picture quality.
TV DISPLAY
You can select the aspect ratio that is appropriate for your TV
display. The default setting is 16:9.
• 4:3 PS
If you have a conventional TV set and
would like to see the DVD picture fill
your TV screen then use this setting. A
wide picture is displayed on the whole
TV screen with a portion automatically
out off.
• 16:9
If you have a widescreen TV set, use this
setting (you must also set your wide-
screen TV to it’s 16:9 mode.).
• 4:3 LB
If you have a conventional ‘square’ set
and would like to see the DVD picture
in its full format, use this setting. Wide
bands will be displayed on the upper
and lower portions of the TV screen.
General Setup
To access the S DVR 52 setup menu, press “SETUP”.
Use / / / to browse through the menus, and press “OK” to select an item.
To exit System Setup, press “SETUP”.
SCREEN SAVER
Turns screen saver ON and OFF.
SCREEN SAVER
RESOLUTION
TV TYPE
GENERAL SETUP
-- GENERAL PAGE --
TV DISPLAY
VIDEO OUTPUT
4 : 3 PS
4 : 3 LB
16 : 9
MAIN PAGE
SCREEN SAVER
RESOLUTION
SET TV STANDARD
-- GENERAL PAGE --
TV DISPLAY
TV TYPE
VIDEO OUTPUT
MULTI SYSTEM
NTSC
PAL
MAIN PAGE
TV TYPE
RESOLUTION
SCREEN SAVER SETTING
-- GENERAL PAGE --
TV DISPLAY
SCREEN SAVER
VIDEO OUTPUT
ON
OFF
MAIN PAGE