JVC HR-J435EA - Manual (Page 23)

23
q 6 5 / 8
2 3
You can use a camcorder as the source player and your video
recorder as the recorder.
Edit From A
Camcorder
MAKE CONNECTIONS
1
Connect the camcorder’s AUDIO/VIDEO OUT
connectors to the recorder’s front panel AUDIO/VIDEO
input connectors.
● When a Master Edit Control-equipped JVC camcorder
is used, the camcorder is capable of controlling the
recorder. Refer to the camcorder’s instruction manual
for operating procedure.
SET RECORDER’S INPUT
MODE
2
Press NUMBER key “0”. “AU” appears in place of a
channel number.
START CAMCORDER
3
Engage its Play mode.
START RECORDER
4
Engage its Record mode.
NOTE:
Connections made to the front panel AUDIO/VIDEO input
connectors automatically override those made to the rear panel
AUDIO/VIDEO input connectors.
1 2 3
4 5 6
7 8 9
0
Player
Camcorder
Recorder Your recorder
NUMBER "0"
VIDEO IN AUDIO
IN
Audio/Video Cable
(not provided)
VIDEO OUT
AUDIO OUT
Editing Cable
(not provided)
To the rear panel
PAUSE connector
EDIT