JVC HR-J468EU EN - Manual (Page 10)

10
EN
Power Save
Mode
Turn on the TV and select the VIDEO channel (or AV mode).
You can reduce the power consumption while the recorder is
turned off.
TURN ON THE RECORDER
1
Press .
ACCESS MAIN MENU
SCREEN
2
Press MENU.
ACCESS MODE SET SCREEN
3
Press %fi to move the
highlight bar (pointer) to
"MODE SET", then press
OK or
#
.
SELECT POWER SAVE
MODE
4
Press %fi to move the
highlight bar (pointer) to
"POWER SAVE", then press
OK or
#
to set to "ON".
● "AUTO SP →
LP TIMER"
appears only with the
HR-J468EU.
RETURN TO NORMAL
SCREEN
5
Press MENU.
MAIN MENU
MODE SET
AUTO CH SET
MANUAL CH SET
INITIAL SET
[ 5∞] =
[MENU] : EXIT
NOTES:
● During Power Save, the display panel will be turned off.
● The Just Clock function (
੬
pg. 42) does not work while the
Power Save mode is engaged.
● While the recorder is in the Power Save mode, the picture
may be distorted momentarily when you turn on/off the
recorder.
● Power Save does not work when ...
... the recorder is in the Timer mode.
... the recorder's power is turned off after timer-recording (or
Instant Timer Recording).
... the Auto Satellite Prog Recording mode is engaged
(
੬
pg. 28).
... "AV2 SELECT" is set to "DECODER" or "SAT" (
੬
pg. 31).
1 2 3
4 5 6
7 8 9
0
2
4
1
3
?
OK
MENU
MODE SET
B. E. S. T. ON
PICTURE CONTROL AUTO
AUTO TIMER OFF
O. S. D. ON
DIRECT REC ON
AUTO SP =LP TIMER OFF
POWER SAVE ON
NEXT PAGE
[ 5∞] =
[MENU] : EXIT
INITIAL SETTINGS (cont.)