JVC GR-D775U - Manual (Page 28)

MasterPage: Heading0_Left
28
EN
ADDITIONAL FEATURES FOR D.S.C.
By resetting the file name, a new folder will be
made. The new files you are going to make will
be stored in the new folder. It is convenient to
separate the new files from previously made
files.
1
Perform steps 1 – 3 in “Normal Playback
Of Images” ( ੬ pg. 27).
2
Press MENU.
3
Select “NO.RESET”, press
SET or 2 . The NO. RESET
screen appears.
4
Select “EXECUTE”, press
SET. The new folder (such as
“101JVCGR”) will be made and
the file name of the next shot starts from
DVC00001.
NOTE:
If the file name reaches DVC09999, a new folder
(such as “101JVCGR”) will be made and the file
name will start again from DVC00001.
The Protect mode helps prevent the accidental
erasure of files.
1
Perform steps 1 – 3 in “Normal Playback
Of Images” ( ੬ pg. 27).
2
Press MENU.
3
Select “PROTECT”, press SET or 2 . The
PROTECT menu appears.
● Press 1 whenever you want to return to the
previous menu screen.
To protect the currently displayed file
4
Select “CURRENT”,
press SET or 2 . The
PROTECT screen
appears.
5
Press 1 or 2 to select
the desired file.
6
Select “EXECUTE”,
press SET.
● To cancel protection,
select “RETURN”.
● Repeat steps 5 and 6
for all files you want to protect.
To protect all files stored in the memory
card
4
Select “PROT.ALL”, press SET or 2 . The
PROTECT screen appears.
5
Select “EXECUTE”, press SET.
● To cancel protection, select “RETURN”.
NOTE:
If the “ ” mark appears, the currently displayed
file is protected.
To Remove Protection
Before doing the following, perform steps 1 – 3
in “Protecting Files”.
To remove protection from the currently
displayed file
4
Select “CURRENT”, press SET or 2 . The
PROTECT screen appears.
5
Press 1 or 2 to select the desired file.
6
Select “EXECUTE”, press SET.
● To cancel selection, select “RETURN”.
● Repeat steps 5 and 6 for all files you want to
remove protection.
To remove protection from all files stored in
the memory card
4
Select “CANC.ALL”, press SET or 2 . The
PROTECT screen appears.
5
Select “EXECUTE”, press SET.
● To cancel selection, select “RETURN”.
Resetting The File Name
Protecting Files
1 Select
2
SET
PROTECT
CURRENT
PROT.ALL
CANC.ALL
Select
RETURN
PROTECT
PROTECT ?
EXECUTE
GR-D775US_EN.book Page 28 Friday, December 15, 2006 11:14 AM