Replacing the lamp – JVC 0706TKH-MW-VPC User Manual

Page 5

Advertising
background image

4

Preparation

Before replacing the lamp, read all the instructions.

Replacing the lamp

Replacement Lamp Kit:
TS-CL110C

• High-pressure mercury lamp

Possible causes of shortened lamp life

Turning on/off the TV repeatedly in a short amount of time
Keeping the TV turned on for more than 24 hours consecutively

Use only the specifi ed
Replacement Lamp Kit!

This lamp is for use with JVC
model televisions. Using the
lamp with a different television
or other product could cause a
malfunction and/or damage to
the television or lamp.

If you feel unsure about replacing the lamp yourself

Consult your retailer

Lamp needs to replaced.
Refer to instructions book for replacement
instructions.

After replacing the Lamp, please reset
timer in the TV menu.

Press OK, if you do not want to see this
message again.

To make the message disappear

Turn the TV off

Wait until the LAMP
indicator stops blinking

LAMP indicator and Power

lamp are refered as “LAMP
LED” and “POWER LED”
on the Instructions of
Replacement Lamp Kit TS-
CL110C.

1

Unplug the TV

2

Wait for at least 1 hour until the lamp has fully cooled

For purchasing the Replacement

Lamp Kit, consult your retailer.

3

The TV uses a lamp to project the picture onto the screen. When the lamp has blown or when the
picture becomes dark, replace the lamp.
Before replacing the lamp, read all the instructions carefully.

Prepare the Replacement Lamp Kit

When the lamp is near to its end...

The following message appears on the screen.

After the usage time of the lamp has reached to 6500 hours, this message appears every time you turn on
the TV.

Remove the lamp cover

Remove the lamp unit

2

Remove the lamp unit

Philips head type screw
driver (cross-head type)

1

Do not drop
the lamp!

If you feel any warmth
near the lamp, DO NOT
TOUCH IT!

Never attempt to replace the lamp with the TV plugged in!

Attempting to replace the lamp with the TV plugged in could lead to a severe electrical
shock.

Never replace the lamp before it has fully cooled!

The lamp becomes extremely hot while in use, which may cause a burn. After turning off
the TV, wait for at least 1 hour.

Loosen

Remove

!

!

!

!

HD-Z70RF7 is used for explanation on the illustrations on this Instructions.

Advertising