JVC KD-S700 - Manual (Page 8)

8
ENGLISH
RADIO BASIC OPERATIONS
To stop searching before a station is received,
press the same button you have pressed for
searching.
Searching a station manually:
Manual search
1
Select the band (FM1 – 3, AM).
Note:
This receiver has three FM bands (FM1, FM2,
FM3). You can use any one of them to listen to an
FM broadcast.
2
Press and hold
¢ or 4 until
"M"(manual) starts flashing on the
display.
Listening to the radio
You can use either automatic searching or manual
searching to tune into a particular station.
Searching a station automatically:
Auto search
1
Select the band (FM1 – 3, AM).
Note:
This receiver has three FM bands (FM1, FM2,
FM3). You can use any one of them to listen to an
FM broadcast.
2
Start searching a station.
When a station is received, searching
stops.
Press ¢ to search
stations of higher
frequencies.
Press 4 to search
stations of lower
frequencies.
AM
AM
FM1 FM2 FM3
Selected band appears.
FM1 FM2 FM3
Selected band appears.
Audio (see page 18) or volume level
indicator
EN08-10 KD-S7250/700/680[J] 26/10/01, 8:49 AM 8