JVC LVT2013-001A - Manual (Page 34)

30
T T imer-Link Recording imer-Link Recording
(External T (External T imer Recording) imer Recording)
If the external device such as Cable/Satellite box that
is connected to this unit has the timer reservation
function, this unit can record the input signal from
external device via the timer INPUT 1 jack.
1. Connect the INPUT 1 input jacks on this unit to
the VIDEO AUDIO(L/R) jack on the external
device using the audio/video cables.
2. Set the timer reservation setting of the external
device.
3. Turn off the external device.
4. Insert a recordable disc or video cassette with the
safety tab intact to this unit. Select the recording
speed with remote.
5. Press z (REC) for more than 3 seconds on the
front panel when the unit power is off.
The "
" mark will flashes on the display window.
This unit is set to standby mode for Timer-Link
recording.
Notes:
• If the power of the external device is on by the
timer reservation setting, this unit detects the
signals of external device and start the
recording automatically.
• If the power of the external device is off during
external timer recording, this unit will be stop
the external timer recording and turns off the
power automatically.
• If the power of the external device is on again,
this unit will be start the external timer record-
ing again.
• Press STOP (x) to stop recording intentionally
while external timer recording is in progress.
• The external timer record is available only for
the device that is connected with INPUT 1 jack
on this unit.
• Your external device such as Cable/Satellite
box might keep running Audio/Video signals
through the OUTPUT jack, even if the unit is
powered off. If so, Timer-Link recording
doesn’t work.
• The external timer record will be set to off
automatically when:
- There is no recordable tape.
- STOP or PAUSE button is pressed while
external timer recording.
- The power of this unit is ON in the external
timer record standby mode.
- When you press the z (REC) for more than
3 seconds again in the external timer record
standby mode.
Program Priority
If the recording time of this unit and the external
device are overlap:
The earlier program takes priority. When the earlier
program finishes, the later program starts.
Timer Link record
Timer Record of this unit