JVC HR-J491MS - Manual (Page 5)

Page 5 April 11, 2002 4:56 pm
Language Setting
A
Access Main Menu screen, then
Initial Set screen
Press MENU on the remote control. Press
rt to place the pointer next to “INITIAL
SET”, then press OK or e .
B
Access Language Select screen
Press rt to place the pointer next to “LANGUAGE”, then press
OK or e .
C
Select language
Press rt to place the pointer next to the
language of your choice (English, Russian
or Arabic), then press OK or
e .
Press MENU to return to normal screen.
Clock Setting
A
Access Main Menu screen, then Initial Set screen
Press MENU on the remote control. Press rt to place the
pointer next to “INITIAL SET”, then press OK or e .
B
Access Clock Set screen
Press rt to place the pointer next to
“CLOCK SET”, then press OK or e .
C
Set time, date and year
Press rt until the desired time appears,
then press OK or e . Set the date and year
in the same way.
● Holding
rt changes the time in
30-minute intervals, or changes the date
in 15-day intervals.
D
Start clock
Press MENU and normal screen appears.
NOTE:
If the year digits are automatically cleared, it is possible that you
have input February 29th in a non-leap year. Input the correct
data.
To make corrections any time during the process
Press OK or
e repeatedly until the item you want to change
blinks, then press rt .
Playback
Basic Playback
A
Load a cassette
Make sure the window side is up, the rear label side is facing you
and the arrow on the front of the cassette is pointing towards the
recorder.
● Do not apply too much pressure when inserting.
● The recorder turns on, and the counter on the on-screen display
is reset, automatically.
● Select the appropriate colour system with “PAL/MESECAM” and
“NTSC” in Function settings.
● If the cassette’s record safety tab has been removed, playback
begins automatically.
B
Start playback
Press PLAY ( 4 ).
[ / ]
[MENU] : EXIT
MAIN MENU
FUNCTION SET
TUNER SET
INITIAL SET
[ / ]
[MENU] : EXIT
INITIAL SET
CLOCK SET
LANGUAGE
[ / ]
[MENU] : EXIT
INITIAL SET
CLOCK SET
LANGUAGE
[ / ]
[MENU] : EXIT
CLOCK SET
TIME DATE YEAR
0 : 00 01.01 01
[ / ]
[MENU] : EXIT
CLOCK SET
TIME DATE YEAR
0 : 00 01.01 01
Turn on the TV and select the video channel or AV mode.
ATTENTION
In the search, still, slow-motion or frame-by-frame playback
mode,
● the picture will be distorted.
● the noise bars will appear.
● there may be a loss of colour
During playback
Stop playback
Press STOP ( 8 ) on the
remote control.
OR Press STOP/EJECT ( 0 ) on
the recorder.
Pause playback and view still picture
Press PAUSE ( 9 ).
● Press PLAY (
4 ) to resume normal playback.
Pause and Frame-by-Frame playback
Press PAUSE ( 9 ) to pause, then press 6 (or PAUSE ( 9 )
repeatedly.
● Press PLAY (
4 ) to resume normal playback.
High speed search
Press REW ( 3 ) or FF ( 5 ).
● Press PLAY (
4 ) to resume normal playback.
● If you press and hold REW (
3 ) or FF ( 5 ) for more than
2 seconds, simply releasing it cancels the picture search, and
normal playback resumes.
Picture search at variable speed (including slow-motion)
Press w or e repeatedly.
● Press PLAY (
4 ) to resume normal playback.
● Each time you press
w or e , the playback speed changes. To
decrease the speed during picture search, press the opposite
direction button repeatedly.
● During still picture, press and hold
e to start forward (or w to
start reverse) slow motion playback. When you release the
button, still picture resumes. During still picture, holding
PAUSE (
9 ) for more than 2 seconds also starts forward slow
motion playback. If you press PAUSE ( 9 ) again, still picture
resumes.
– Initial Settings –
HR-J491MS-ENnew.fm Page 5 Thursday, April 11, 2002 4:58 PM