Location of controls and indicators – Jensen JTA-475 User Manual
Page 8
8
right speaker terminal
2. Connect the left speaker to the left speaker terminals with the red wire to L+ and the
black wire to L -.
3. Connect the right speaker to the right speaker terminals with the red wire to R+ and
the black wire to R -.
NOTE:
Make sure that the power is turned off when connecting or disconnecting the speakers.
Make sure that the speakers are connected to the correct terminals.
CONNECTING THE AC POWER CORD
After connecting the speakers unwind the AC power cord fully and connect it to any convenient
household 120V~ 60Hz AC outlet.
NOTE:
The product is designed to operate on normal 120V~ 60Hz AC only. Connecting this system to
any other power supply could result in damage to the unit which is not covered by your warranty.
You will noted that this system is equipped with a polarized AC power plug having one blade
wider than the other. This is a safety feature.
If this plug does not fit into your existing AC outlet, do not try
to defeat this safety feature by filling the wide blade to make
it fit into your outlet. If this plug will not fit into your outlet, you
probably have an outdated non-polarized AC outlet. You
should have your outlet changed by a qualified licensed
electrician.
FRONT VIEW & BACK VIEW
LOCATION OF CONTROLS AND INDICATORS