Johnson Controls M9220-GGX-3 - Manual (Page 3)

M9220-GGx-3 Proportional Electric Spring Return Actuators Installation Instructions 3
Accessories
Mounting
The M9220-GGx-3 Proportional Electric Spring Return
Actuators can be easily installed on dampers with
1/2 to 3/4 in. or 12 to 19 mm round shafts, or 3/8 and
1/2 in. or 10, 12, and 14 mm square shafts. An
M9220-600 Jackshaft Coupler Kit is available for 3/4 to
1-1/16 in. or 19 to 27 mm round shafts, or 5/8 and 3/
4 in. or 16, 18, and 19 mm square shafts; see Table 1
for more details. If the damper shaft extends less than
3-19/32 in. (91 mm), see the Removable Coupler
section for further instructions. If the damper shaft
extends less than 1-5/32 in. (29 mm), install an
extension recommended by the damper manufacturer.
Table 1: Accessories and Replacement Parts (Order Separately)
Code Number Description
DMPR-KC003 1 7 in. (178 mm) Blade Pin Extension (without Bracket) for Johnson Controls ® Direct-Mount Damper
Applications (quantity 5)
M9000-153 Crank arm (quantity 1)
M9000-158 Tandem Mounting Kit used to Mount Two Models of M9210/20 Proportional Electric Spring Return
Actuators (quantity 1)
M9000-170 Remote Mounting Kit, Horizontal. Kit includes Mounting Bracket, M9000-153 Crank Arm, Ball Joint,
and Mounting Bolts (quantity 1)
M9000-171 Remote Mounting Kit, Vertical. Kit includes Mounting Bracket, M9000-153 Crank Arm, Ball Joint, and
Mounting Bolts (quantity 1)
M9000-200 Commissioning Tool that Provides a Control Signal to Drive 24 V On/Off, Floating, Proportional,
and/or Resistive Electric Actuators (quantity 1)
M9000-320 Weather Shield Enclosure - NEMA 3R enclosure for protecting a single M9210/20 actuator from rain,
sleet, or snow (quantity 1)
M9000-400 Jackshaft Linkage Kit. Open-ended design enables clamping onto a jackshaft without requiring access
to the ends of the jackshaft (quantity 1)
M9000-604 Replacement Anti-rotation Bracket Kit (with Screws) for M9210-xxx-3 Series Proportional Electric
Spring Return Actuators (quantity 1)
M9200-100 Threaded Conduit Adapter, 1/2 NPSM, for M9210(20) and M(VA)9208 Series Actuators (quantity 5)
M9220-600 1 in. (25 mm) Jackshaft Coupler Kit (with Locking Clip) for Mounting M9210-xxx-3 Series Proportional
Electric Spring Return Actuators on Dampers with 3/4 to 1-1/16 in. or 19 to 27 mm Round Shafts, or
5/8 and 3/4 in. or 16, 18, and 19 mm Square Shafts (quantity 1)
M9220-601 Replacement Coupler Kit (with Locking Clip) for Mounting M9210-xxx-3 Series Proportional Electric
Spring Return Actuators on Dampers with 1/2 to 3/4 in. or 12 to 19 mm Round Shafts, or 3/8 and 1/
2 in. or 10, 12, and 14 mm Square Shafts (quantity 1)
M9220-602 Replacement Locking Clips for M9210-xxx-3 Series Proportional Electric Spring Return Actuators
(Five per Bag)
M9220-603 Adjustable Stop Kit for M9210-xxx-3 Series Proportional Electric Spring Return Actuators (quantity 1)
M9220-604 Replacement Manual Override Cranks for M9210-xxx-3 Series Proportional Electric Spring Return
Actuators (Five per Bag)
M9220-610 Replacement Shaft Gripper, 10 mm Square Shaft with Locking Clip (quantity 1)
M9220-612 Replacement Shaft Gripper, 12 mm Square Shaft with Locking Clip (quantity 1)
M9220-614 Replacement Shaft Gripper, 14 mm Square Shaft with Locking Clip (quantity 1)
1. Furnished with the damper and may be ordered separately.