JVC KD-S12 - Manual (Page 12)

12
ENGLISH
Sound adjustments
Selecting preset sound modes
(C-EQ: custom equalizer)
You can select a preset sound mode suitable to
the music genre.
~
Indication For:
Preset values
BAS* 1 TRE* 2 LOUD* 3
USER (Flat sound) 00 00 OFF
ROCK Rock or disco
music +03 +01 ON
CLASSIC Classical
music
+01 –02 OFF
POPS Light music +04 +01 OFF
HIP HOP Funk or rap
music
+02 00 ON
JAZZ Jazz music +02 +03 OFF
* 1 BAS: Bass; * 2 TRE: Treble;
* 3 LOUD: Loudness
Adjusting the sound
You can adjust the sound characteristics to your
preference.
1
2
Indication pattern changes as
you adjust the level.
Ex.: When “TRE” is selected
Indication Range
BAS* 4 (bass)
Adjust the bass.
–06 (min.) to
+06 (max.)
TRE* 4 (treble)
Adjust the treble.
–06 (min.) to
+06 (max.)
FAD* 5 (fader)
Adjust the front and rear
speaker balance.
R06 (Rear only)
to
F06 (Front only)
BAL (balance)
Adjust the left and right
speaker balance. L06 (Left only)
to
R06 (Right only)
LOUD* 4 (loudness)
Boost low and high
frequencies to produce a
well-balanced sound at low
volume level.
LOUD ON
J
LOUD OFF
VOL* 6 (volume)
Adjust the volume.
00 (min.) to
30 or 50 (max.)*
7
* 4 When you adjust the bass, treble, or
loudness, the adjustment you have made is
stored for the currently selected sound mode
(C-EQ) including “USER.”
* 5 If you are using a two-speaker system, set
the fader level to “00.”
* 6 Normally the +/– buttons work as the volume
control. So you do not have to select “VOL”
to adjust the volume level.
* 7 Depending on the amplifier gain control
setting. (See page 13 for details.)
EN10-13_KD-S12[J]f.indd 12 EN10-13_KD-S12[J]f.indd 12 7/11/05 4:02:31 PM 7/11/05 4:02:31 PM