JVC PD-42X50BU - Manual (Page 10)

8
Setting up your TV
PD-42X50BU/J/S / LCT1770-001A-U / English (EK)
„ Rear Panel
1 Aerial socket (page 7)
2 EXT-1 terminal (pages 7, 43, 47)
3 EXT-2 terminal (pages 7, 12, 43, 47)
4 EXT-3 terminal (pages 43, 47)
5 EXT-4 terminal (pages 43, 47)
6 AUDIO OUT terminal (page 48)
7 CENTRE CH input terminal (page 49)
8 Subwoofer out terminal (page 48)
9 HDMI terminal (page 50)
Connecting the power cord to
the AC outlet
Attaching the ferrite cores
Using the power cord without ferrite core
may lead to noise (interference).
Attach the ferrite core to the AC plug end of
the power cord for the TV.
Insert the AC plug on the power cord from
the TV into AC outlet.
Caution
• Operate only from the power source
specified (AC 110 – 240 V, 50 Hz) on
the unit.
• Failure to use the supplied power cord
or to insert it into a correctly earthed
outlet may result in electric shocks.
Use the supplied power
cord which best suits the
area in which you live.
Insert the AC plug into a
correctly earthed outlet.
Putting the batteries into the
remote control
Use two AA/R6 dry cell batteries.
Insert the batteries from the - end, making
sure the + and - polarities are correct.
• Follow the warnings printed on the
batteries.
• Battery life is about six months to one
year, depending on how much you use the
remote control.
• The batteries we supply are only for
setting up and testing your TV, please
replace them as soon as you need to.
• If the remote control does not work
properly, replace the batteries.
Supplied ferrite core
Power cord
Ferrite core
Back of the TV
Power cord
AC INLET
PD-42X50(EK)_Eng.book Page 8 Friday, October 8, 2004 10:37 AM