John Lewis JLWM 1203 - Manual (Page 25)

6. When no more water comes out,
unscrew the pump cover by turning it
anti-clockwise and remove the filter.
Use pliers, if necessary. Always keep a
towel nearby to dry up any water
spillages when removing the cover.
Clean the filter under a tap, to remove
any traces of fluff.
7. Remove foreign bodies and fluff from
the filter seat and from the pump
impeller.
8. Check carefully whether the pump
impeller rotates (it rotates jerkily). If it
doesn’t rotate, please contact your
Service Centre.
9. Put the cap back on the emergency
emptying hose and place the latter back
in its seat.
10. Replace the filter into the pump by
inserting it correctly into the special
guides. Screw the pump cover firmly by
turning it clockwise.
11. Close the pump door.
25