JVC AV 32320 - Manual (Page 48)

Button Functions - PIP
48
Freeze
Swap
Channel +/- for PIP
Source
Use the F REEZE button to lock a single, still image onto the PIP window.
• If PIP is off when F REEZE is pressed, a snapshot of the main screen is taken and placed in
the PIP window.
• If PIP is on when F REEZE is pressed, the image in the window when the button was pressed
is held.
You can exchange the channel displayed on the main screen for the one shown in the PIP win-
dow by pressing S
WAP .
Like the main C HANNEL +/- buttons, C HANNEL +/- for PIP lets you scan through the channels in
the PIP window.
• Direct channel selection with the 10 key pad for PIP is not possible.
You can select the signal source for the PIP window image.
AV-36320 and AV-32320 only
• If the PIP does not have a signal, the window will be blue.
• If you connect a DVD to Video-2 the PIP window will be blue.
TV V-1 V-2 V-3
• The PIP window is 1/9 the size of the full screen.
• PIP will not display blocked channels or programs. A blue screen will display instead.
• You can adjust the PIP window picture the same as the main picture. (See page 37).
NOTES:
EZ-Surf (AV-36360, AV-36S36, AV-32360 and AV-32S36 ONLY)
EZ-Surf utilizes the PIP window to surf all the available channels so that you don’t have to
change your current program to see what else is on TV.
• If the PIP window is off, you can see the channel numbers and XDS only.
TV V-1 V-2
AV-32/36S33/36/320/330/360 ENG 10/2/02 12:19 PM Page 48