GE 24961 GE Universal Remote - Manual (Page 10)

9
Programming With Code
Search
If your TV, VCR, DVD, CD player, satel-
lite receiver, or Cable Box or audio
receiver does not respond after you
have tried all the codes for your brand,
or if your brand is not listed, try
searching for your code by following
the steps below.
1. Turn on the device you wish to
program.
2. Press the device
button for which
you are trying
to program.
3. Press and hold
SETUP until the
device button lights,
then release SETUP.
4. Press and release
until your
device turns off.
Important: You may have to press
ON•OFF up to 300 times.
5. When your device
turns off, press the
ENTER button, the
INDICATOR LIGHT
will go off.
SETUP
ENTER
TV
DVD
SAT/
CBL
VCR
AUX 1
AUX 2
ON•OFF
24961 manual/NOSPAN 12/11/03 9:33 AM Page 10