JVC GET0665-001A User Manual

Page 39

Advertising
background image

39

ENGLISH

Symptom

Remedy/Cause

USB device playback

• “CANNOT PLAY” flashes on

the display.

• “NO USB” appears on the

display.

• The unit cannot detect the

USB device.

• Attach a USB device that contains tracks encoded in an

appropriate format.

• Reattach the USB device again.

While playing a track, sound
is sometimes interrupted.

The MP3/WMA tracks have not been properly copied into
the USB device.
Copy MP3/WMA tracks again into the USB device, and try
again.

Correct characters are not
displayed (e.g. album name).

This unit can only display letters (upper case), numbers,
and a limited number of symbols. (

9)

Bluetooth *

2

Bluetooth device does not
detect the unit.

The unit can be connected with one Bluetooth mobile
phone and one Bluetooth audio device at a time.
While connecting a device, this unit cannot be detected
from another device. Disconnect currently connected
device and search again.

The unit does not detect the
Bluetooth device.

• Check the Bluetooth setting of the device.
• Search from the Bluetooth device. After the device

detects the unit, select “OPEN” on the unit to connect the
device. (

13)

The unit does not make
pairing with the Bluetooth
device.

• Enter the same PIN code for both the unit and target

device.

• Select the device name from “SPECIAL,” then try to

connect again. (

14)

• Try to pair/connect from the Bluetooth device.

Echo or noise occurs.

Adjust the microphone unit position.

Phone sound quality is poor. • Reduce the distance between the unit and the Bluetooth

mobile phone.

• Move the car to a place where you can get a better signal

reception.

The connected audio device
cannot be controlled.

Check whether the connected audio device supports
AVRCP (Audio/Video Remote Control Profile).

The sound is interrupted or
skipped during playback of a
Bluetooth audio device.

• Reduce the distance between the unit and the Bluetooth

audio device.

• Disconnect the device connected for “BT-PHONE.”
• Turn off, then turn on the unit.
• Connect the Bluetooth audio device again, when the

sound is not yet restored.

*

2

For Bluetooth operations, refer also to the instructions supplied with the Bluetooth Adapter.

EN34-43_KW-XR610[J]3.indd 39

EN34-43_KW-XR610[J]3.indd 39

1/15/10 9:43:12 AM

1/15/10 9:43:12 AM

Advertising