Jonsered CS 2147 - Manual (Page 36)

36 – English
TECHNICAL DATA
Technical data
Note 1: Noise emissions in the environment measured as sound power (L
WA
) in conformity with EC directive 2000/14/EC.
Note 2: Equivalent noise pressure level, according to ISO 7182, is calculated as the time-weighted energy total for noise pressure levels under
various working conditions with the following time distribution: 1/3 idling, 1/3 max. load, 1/3 max. speed.
Note 3: Equivalent vibration level, according to ISO 7505, is calculated as the time-weighted energy total for vibration levels under various working
conditions with the following time distribution: 1/3 idling, 1/3 max. load, 1/3 max. speed.
CS 2147 CS 2152
Engine
Cylinder displacement, cm
3
45,0 51,7
Cylinder bore, mm 42,0 45
Stroke, mm 32,5 32,5
Idle speed, rpm 2700 2700
Recommended max. speed, rpm 14200 13000
Power, kW/ rpm, Europe 2,5/9600 2,4/9000
Power, kW/ rpm, Australia - 2,4/9000
Ignition system
Manufacturer of ignition system
SEM SEM
Type of ignition system CD CD
Spark plug NGK BPMR 7A
Champion RCJ 7Y NGK BPMR 7A
Champion RCJ 7Y
Electrode gap, mm 0,5 0,5
Fuel and lubrication system
Manufacturer of carburettor
Zama Zama
Carburettor type C3-EL18 C3-EL18
Fuel tank capacity, litre 0,5 0,5
Oil pump capacity at 9,000 rpm, ml/min 5-12 5-12
Oil tank capacity, litre 0,28 0,28
Type of oil pump Automatic Automatic
Weight
Chain saw without bar or chain, empty tanks, kg
5,0: CS 2147 5,1:CS
2147 W, CS 2147
CWH
5,0: CS 2152, CS
2152 C
5,1: CS 2152 W, CS
2152 WH, CS 2152
CW, CS 2152 CWH
Noise emissions
(see note 1)
Sound power level, measured dB(A)
114: CS 2147,
113: CS 2147 CWH
112: CS 2152 C, CS
2152 CW, CS 2152
CWH
113: CS 2152, CS
2152 W, CS 2152 WH
Sound power level, guaranteed L
WA
dB(A) 115: CS 2147
114: CS 2147 CWH 113: CS 2152 C, CS
2152 CW, CS 2152
CWH
114: CS 2152, CS
2152 W, CS 2152 CW,
CS 2152 WH
Noise levels
(see note 2)
Equivalent noise pressure level at operator’s ear,
measured according to relevant international standards,
dB(A)
Europe:
102 102
Australia: - 102
Vibration levels
(see note 3)
Front handle,/Rear handle, m/s
2
(Europe) 2,9/2,9 3,0/4,1
Front handle,/Rear handle, m/s
2
(Australia) - 3,0/4,1
Chain/bar
Standard bar length, inch/cm
13"/33 13"/33
Recommended bar lengths, inch/cm 13-20"/33-50 13-20"/33-50
Usable cutting length, inch/cm 12-19"/31-49 12-19"/31-49
Chain speed at max. power, m/sec 18,5 17,3
Pitch, inch/mm 0,325/8,25 0,325/8,25
Thickness of drive links, inch/mm 0,050/1,3 0,050"/1,3mm
0,058/1,5 0,058/1,5
Number of teeth on drive sprocket 7 7