JVC DR-MV7SU - Manual (Page 21)

21
HOOKUP
AND
SETTINGS
Manual
If your local TV station does not send date and
time information, or sends incorrect information,
you can set the clock manually.
1. Select the [Clock Set] > [Manual] option.
2. Press ENTER.
3. Enter the necessary information for year, date
and time.
b / B
(left/right): Moves the cursor to the
previous or next column.
v / V
(up/down): Changes the setting at the
current cursor position.
4. Press ENTER to confirm your setting.
5. Press HOME to exit the Setup menu.
TV Aspect
4:3 Letter Box:
Select when a standard 4:3 TV is connected.
Displays theatrical images with masking bars
above and below the picture.
4:3 Pan Scan:
Select when a standard 4:3 TV is connected.
Displays pictures cropped to fill your TV screen.
Both sides of the picture are cut off.
16:9 Wide:
Select when a 16:9 wide TV is connected.
Power Save Mode
Set Power Save Mode to [ON] to place your
Recorder into an economic power save mode.
Nothing is displayed in the display window when the
unit is turned off.
Factory Set
You can reset the Recorder to its original factory
settings.
1. Select the [Factory Set] option.
2. Press B to select [SET] then press ENTER.
3. Select [OK] and press ENTER.
4. Follow the Initial Setup Wizard on page 18.
Language Settings Language Settings
Display Menu
Select a language for the Setup menu and
information display.
\
Disc Menu / Audio / Subtitle
[Original] : Refers to the original language in
which the disc was recorded.
[Others] : To select another language, press
number buttons to enter the corresponding 4-digit
number according to the language code list in the
reference chapter (see page 50). If you enter the
wrong language code, press CLEAR.
[OFF] (for Disc Subtitle) : Turn off Subtitle.