JVC KS-F530R - Manual (Page 15)

15
ENGLISH
Selecting FM reception sound
When an FM stereo broadcast is hard to receive:
Press MO/RND/
(mono/random/Dolby: for KS-FX730R), MO/RND (mono/random: for KS-
FX630R) or MO (mono: for KS-F530R) while listening to an FM stereo broadcast. The sound
you hear becomes monaural but reception will be improved.
To restore the stereo effect, press the same button again.
MO/RND/ (For KS-FX730R)
MO/RND (For KS-FX630R)
MO (For KS-F530R)
Display Mode
Setting the main display mode.
1. Press the SEL button for more than 2
seconds to set the preferred setting mode.
2. Select “DISPMODE” with the
¢
or
4
button.
3. Select the desired mode with the + or -
button.
(Station name (PS NAME)
Ô
Frequency
being received (FREQ)
Ô
Clock time
(CLOCK)
Ô
) (see page 23.)
Note:
When the “CLOCK” mode is set, clock time
remains on the main display even during tape (or
CD (KS-FX730R/FX630R only)) playback.
Display Button
The DISP button is used to select the
Operation (Tuner, Tape or CD (KS-FX730R/
FX630R only)) and Clock modes. Each time
the button is pressed, the display changes as
follows:
Operation mode (Station name*
=
Frequency
being received
=
PTY* ; or TAPE; or CD (KS-
FX730R/FX630R only))
=
Clock time.
The display returns to the initially preset mode
after a short while.
* When the RDS or PTY signal is weak or
when not tuned to an RDS or PTY station,
the Station name or PTY is NOT displayed.
Other convenient tuner functions
Lights when receiving an FM broadcast in stereo.
ST
MO