JVC PD-35S50J - Manual (Page 47)

SET UP menu
45
PD-35S50J / LCT1653-001A-U / English (EK)
„ DUBBING
You can choose a signal source to be output
from the EXT-2 terminal.
You can do this with the output signals of the
devices connected to other EXT terminals, or
with the picture and sound from a TV
channel you are currently viewing.
1 Press the 5 buttons to choose
the arrow from the menu
2 Press the 6 buttons to choose an
EXT terminal or TV.
Then press the a button
The arrow in the menu represents a signal
flow. The left side of the arrow shows a
signal source output from the EXT-2
terminal.
EXT-1/EXT-3/EXT-5:
The output signal of the device connected
to an EXT terminal passes through the TV
and is output from the EXT-2 terminal.
TV:
The picture and sound of the TV channel
you are currently viewing are output from
the EXT-2 terminal.
• During dubbing, you cannot turn off
the TV. Turning off the TV also turns
off the output from the EXT-2
terminal.
• When you choose an EXT terminal as
an output, you can view a TV
programme or a picture from the other
EXT terminal while dubbing the
picture from a device connected to the
EXT terminal onto a VCR connected
to the EXT-2 terminal.
• The RGB signals from TV games
cannot be output. Teletext programmes
cannot be output.
PICTURE SHIFT
The picture displayed on the screen is shifted
up, down and to the left and right at regular
intervals. In order to prevent burn-in, set this
function to FAST or SLOW.
1 Choose PICTURE SHIFT
2 Press the 5 buttons to choose a
mode
OFF:
PICTURE SHIFT is turned off.
SLOW:
The picture is shifted every 30 minutes.
FAST:
The picture is shifted every 10 minutes.
3 Press the a button
The menu disappears.
D0022-EN
OK
EXT-1
EXT-3
DUBBING
EXT-2
EXT-4
EXT-5
TV
> EXT SETTING
PD-35S50J(EK)_Eng.book Page 45 Friday, April 23, 2004 1:14 PM