JVC SR-DVM70US - Manual (Page 72)

Filename [DVM70S_13Subsidiary.fm]
Masterpage:Left+
72
EN
SUBSIDIARY SETTINGS
Page 72Friday, 6 May 2005 12:06
8
2ND AUDIO RECORD ^ OFF / ON
When this function is set to AONB;
If a SAP program is received, the SAP audio is recorded on L/R
tracks. The main audio is not recorded.
If a non-SAP program is received, the main audio is recorded on L/
R tracks.
When this function is set to
AOFFB, the SAP audio cannot be recorded.
NOTE:
When the channel is changed on the unit;
● The AMONOB indicator appears on the screen for about 5
seconds if the program is a monaural broadcast.
● The ASTEREOB indicator appears on the screen for about 5
seconds if the program is a stereo broadcast.
● Both ASTEREOB and ASAPB indicators appear when a stereo
program is accompanied by SAP sound.
● Both AMONOB and ASAPB indicators appear when the main audio
on the monaural broadcast is accompanied by SAP sound.
8
JUMP TIME ^ 15 MIN / 30 MIN / 1 HR
You can locate a scene ahead of or behind the currently viewed one
by jumping a selected time interval during playback (or Live Memory
Playback). For details, refer to
AJump SearchB (A pg. 26, 40).
DISPLAY SET
8
SUPERIMPOSE ^ AUTO / ON / OFF
When this function is set to AAUTOB, various operational indicators
appear on the TV screen. Messages appear in the selected
language. (A pg. 20)
AUTO :
To superimpose operational indications for approximately five
seconds just after the corresponding operation.
ON:
To turn on superimposed indications.
OFF:
To turn off superimposed indications.
NOTES:
● When you use this unit as the source player for editing, be sure to
set
ASUPERIMPOSEB to AOFFB before starting. (A pg. 63)
● When you select AAUTOB, during playback, the operation mode
indicators may be disturbed depending on the type of disc being
used.
8
BLUE BACK ^ OFF / ON
When this function is set to AONB, the TV screen becomes all blue
when receiving a channel not in use.
NOTE:
When you want to receive an unstable channel with poor signals,
set this function to
AOFFB.
8
DIMMER ^ BRIGHT / DIMMED
You can change the brightness of the front display panel.
BRIGHT :
Normally select this.
DIMMED :
To dim the front display panel. (Blue lamp on the front display
panel is turned off.)
8
POWER SAVE ^ OFF / ON
When this function is set to AONB, you can reduce the power
consumption while the unit is turned off.
NOTES:
● During Power Save mode ^
^ the front display panel will be turned off.
● Power Save does not work when ^
^ the unit is in the Timer mode.
● It takes some time for the unit to complete initialization after you
turn on the unit power, with
AWAKE UPB blinking on the front
display panel.
8
ON SCREEN LANGUAGE
This unit offers you the choice to view on-screen messages in 3
different languages.
For details, refer to
AOn-screen Language SetB (A pg. 20)
VIDEO IN/OUT
8
MONITOR TYPE ^ 4:3LB / 4:3PS / 16:9AUTO / 16:9FIX
You can select the monitor type depending on the TV used when
you play back DVD VIDEO discs recorded for wide-screen TVs.
For details, refer to
AMonitor SetB (A pg. 23).
8
FRONT AUX F-1 ^ VIDEO / S-VIDEO
Select the appropriate mode depending on the connector (F-1)
being used on the front panel.
VIDEO :
To use the [VIDEO] input connector on the front panel.
S-VIDEO :
To use the [S-VIDEO] input connector on the front panel.
8
REAR AUX L-1 ^ VIDEO / S-VIDEO
Select the appropriate mode depending on the connector (L-1)
being used on the rear panel.
VIDEO :
To use the [VIDEO INPUT] connector on the rear panel.
S-VIDEO :
To use the [S-VIDEO INPUT] connector on the rear panel.
DVM70S_00.book Page 72 Friday, May 6, 2005 12:06 PM