Dv mode set, Subsidiary settings (cont.) – JVC HR-DVS3U User Manual
Page 76
Masterpage:Left-FullCol
76
EN
Filename [DVS3U_4-EN.fm]
Page 76
January 10, 2002 10:49 am
SUBSIDIARY SETTINGS (cont.)
DV MODE SET
* The default setting is bold in the table below.
8
SOUND MODE
12BIT
16BIT
Select the appropriate mode before recording on a Mini DV tape.
12BIT
:
Enables Audio Dubbing later.
16BIT
:
Audio Dubbing is impossible but the recorded sound quality is
higher than “12BIT”.
8
12BIT MODE
SOUND1
SOUND2
FULL
Select the appropriate mode when playing back an audio-dubbed Mini DV tape.
SOUND1
:
Original recorded sound
SOUND2
:
Audio-dubbed sound
FULL
:
Original recorded sound and Audio-dubbed sound
NOTES:
● When “12BIT MODE” is set to “FULL”, both the main and sub audio will be audible.
● To select only the main audio or only the sub audio of bilingual tapes, set “12BIT MODE”
to “SOUND1”.
DVS3U_1-EN.book Page 76 Thursday, January 10, 2002 10:51 AM