JVC KD-S20 - Manual (Page 8)

8
ENGLISH
Setting the clock
1
Press and hold SEL (select) for more
than 2 seconds.
“CLOCK H,” “CLOCK M,” or “LEVEL”
appears on the display.
2
Set the hour.
1 Select “CLOCK H” (hour) if not shown on
the display.
2 Adjust the hour.
3
Set the minute.
1 Select “CLOCK M” (minute).
2 Adjust the minute.
4
Finish the setting.
To check the current clock time or change the
display mode
Press DISP (display) repeatedly.
Each time you press the button,
the display changes as follows:
• During tuner operation:
• During CD operation:
• During power off:
The power turns on and the clock time is
shown for 5 seconds, then the power turns off.
Frequency Clock
Clock Elapsed playing time
CLOCK M CLOCK H
LEVEL
CLOCK M CLOCK H
LEVEL
EN07-08KD-S20[J]f.p65 14/11/03, 9:49 AM 8