Random as- semble editing, Make connections, Prepare for editing – JVC HR-E939EG User Manual
Page 32: Load source cassette, Start source playback, Access r.a. edit func- tion, Locate edit-in point, Editing (cont.)
32
EN
R.A. EDIT
REMOTE
PAUSE
8
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
8
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
0
1
3
This function makes it easier to create edited videos when your
video recorder is used as the source player in combination with
another JVC video recorder equipped with a Remote PAUSE
Connector. You can pre-program up to 8 scenes or “cuts” for
automatic editing in the sequence you have specified.
You can also perform Random Assemble Editing with a second
non-JVC recorder.
੬
pg. 33
Random As-
semble Editing
CANCEL
PLAY
STOP
EDITING (cont.)
MAKE CONNECTIONS
1
Connect your recorder’s AV1 IN/OUT connectors to the
VIDEO IN and AUDIO IN connectors on the recording
deck, and connect your recorder’s R.A. EDIT connector
to the PAUSE connector on the recording deck.
● If the recording deck doesn’t have a PAUSE connec-
tor, connect to the R.A. EDIT connector instead.
● The Mini-plug cable is a mono 3.5 mm mini-plug to
mono 3.5 mm mini-plug connector.
PREPARE FOR EDITING
2
Insert the cassette to be recorded on into the recorder
and set the recorder's input mode.
LOAD SOURCE CASSETTE
3
Insert the source cassette into your recorder.
START SOURCE PLAYBACK
4
Press PLAY.
ACCESS R.A. EDIT FUNC-
TION
5
Press R.A. EDIT.
● The screen is superimposed on the video playback in
step 6.
LOCATE EDIT-IN POINT
6
Find the point on the source
tape from where you want
the edited scene to begin by
pressing PUSH JOG or
using the TIME SCAN
SHUTTLE ring or the JOG
dial, then press IN/OUT.
● The edit-in point is
registered in memory and appears on the screen.
● You can also perform an Index Search (if index marks
have been previously recorded on the tape at the
desired points) to find the points you want, but this
will result in reduced accuracy.
fi %
PLAY
JOG
STOP
Player
Your recorder
Audio signal
Video signal
Another recorder
(w/PAUSE connector)
Mini-plug Cable
(Not provided)
Recorder
TIME SCAN SHUTTLE
START
IN/OUT
R.A. EDIT
START
IN/OUT
R.A. EDIT
PUSH JOG
=1
2
3
4
5
6
7
8
0:00:00
(+) 0:00:00