JVC CA-MXJ770V - Manual (Page 8)

English
– 7 –
1 Connect the AM loop antenna to the AM
LOOP terminals as illustrated.
2 Turn the AM loop antenna until you have the
best reception.
To connect an outdoor AM antenna
When reception is poor, connect a single vinyl-covered wire
to the AM EXT terminal and extend it horizontally. (The AM
loop antenna must remain connected.)
For better reception of both FM and AM
• Make sure the antenna conductors do not touch any other
terminals and connecting cords.
• Keep the antennas away from metallic parts of the unit,
connecting cords, and the AC power cord.
AM antenna Connecting Speakers
COAXIAL
ANTENNA
AM LOOP
FM 75
AM EXT
2 3 1
Blue
Speaker
cord
(blue/black)
1 2, 3
To right
speaker
To left
speaker
Black
Black
Red
Speaker cord
(red/black)
Speaker
cord
(blue/black)
1 Press and hold the clamp of the speaker
terminal on the rear of the unit.
2 Insert the end of the speaker cord into the
terminal.
Match the polarity (color) of the speaker terminals:
ª ª ª ª ª
to ª ª ª ª ª and · · · · · to · · · · ·.
3 Release the finger from the clamp.
IMPORTANT: Use only speakers with the same speaker
impedance as indicated by the speaker terminals on the
rear of the unit.
Vinyl-covered wire
(not supplied)
AM loop antenna
(supplied)
EN01-12.MX-J770[U]/3 16/06/2000, 9:24 AM 7