Jens of Sweden MP-500 - Manual (Page 19)

TH
E
PL
AY
ER
S
DI
FF
ER
EN
T
M
OD
ES
–
3.
R
EC
OR
D
M
OD
E
3. RECORD MODE
RECORD
1. Use the NAVIGATE buttons to choose source and recording quality (Bitrate)
2. Confirm the setting and start the recording by pressing the REC button.
3. Stop the recording by pressing the REC button a second time.
4. Depending on selected recording source the files will be stored in the
following catalogs.
- Line-In recordings will be placed in RECORD / LINE IN
- Voice recordings will be placed in RECORD / VOICE
5. The following information is shown on the screen (example):
- MP3 – File format of the recorded file
- 16kHz – Sampling frequency of the recorded file
- 32kbps – Bitrate quality when recording
- 468MB – Storage left on the player
RECORD SOURCE
There are two different types of recording modes to choose from:
1. MUSIC (Line In)
Direct recording from for example a Compact Disc Player. Connect a Line-In
cable from the Line-Out port on the external source to the Line-In port on
the MP-500.
2. VOICE:
INT.MIC – Records through the internal microphone.
EXT.MIC – Records through and external microphone (not included) which is
connected to the Line-In jack.
BITRATE QUALITY
A higher bitrate results in better sound quality and larger file sizes.
There are seven different bitrates to choose from; 32, 48, 64, 96, 128, 160 and
192kbps.
53