GE RM24965 - Manual (Page 4)

7 6
Direct Code Entry
Write your codes down here for easy reference
later.
1. Press and hold the CODE SEARCH
button until the red indicator stays on,
then release the CODE SEARCH
button.
2. Press and release the desired mode
button ( TV , VCR , etc.). The red indicator
blinks, then stays lit.
3. Enter the 4 digit code
from the code tables
(on separate sheet).
Note: after a valid code
entry, the red indicator
turns off. For an invalid
code, the red indicator
flashes.
4. With your device on, press ON/
OFF. If the device turns off, no
further programming is required.
Note: If some buttons do not
operate your equipment, try one of
the other codes for your brand.
Device Device stored Code
TV TV
DVD
CBL/SAT
VCR/AUX
GUIDE button displays on-screen Satellite Channel
Guide.
CHANNEL+ and CHANNEL- buttons perform the
“Page+” and “Page-” function for on-screen Guide
Menus used by some Satellite systems.
INFO button brings up Satellite Display screen for
current Channel and system information.
MENU brings up the Satellite Menu screen - use
with the UP, DOWN, LEFT & RIGHT navigation
buttons.
OK button is used for on-screen Menu selection.
EXIT button is used to Exit or Clear on-screen
Menu displays.
INPUT button performs the Satellite TV/SAT func-
tion.
This remote has several dedicated buttons used for
DVD functions. The descriptions may vary from your
original remote descriptions.
SCAN+ and SCAN- buttons control the speed of
Fast Forward and Reverse Playback respectively.
SKIP (Channel Up & Down) buttons respectively
locate the succeeding or preceding Chapters or
Tracks on a disc.
INFO button brings up DVD Display or Control
Menu for Chapter/Track/Title number, Time remain-
ing/elapsed indication, system information, etc.
MENU brings up the DVD disc Menu screen - use
with the UP, DOWN, LEFT & RIGHT navigation
buttons.
OK button is used for on-screen Menu selection.
Note some DVD players require the Play button to
be used.
EXIT Exit On-Screen Menus and/or Return to
previous On-Screen selection.
PLAY button is used to start Disc playback and for
Menu selection on some DVD players.
STOP button stops Disc playback.
PAUSE button pauses Disc playback - press PLAY
to resume.
TITLE (GUIDE) Brings up the DVD Title Menu
screen.
INPUT brings up the DVD Players Setup Menu.
Note, not all DVD Players support all the functions
described above.
DVD Functions
SAT Functions