JVC KD-G498 - Manual (Page 2)

2
ENGLISH
How to reset your unit
While holding SEL (select), press (standby/on attenuator) for more than 2 seconds.
This will reset the built-in microcomputer.
Notes:
• Your preset adjustments—such as preset channels or sound adjustments—will also be erased.
• If a disc is in the unit, it will eject when you reset the unit. Be careful not to drop the disc.
How to forcibly eject a disc
While holding (standby/on attenuator), press 0 (eject) for more than 2 seconds until the
disc is ejected from the loading slot, if a disc cannot be recognized by the unit or cannot be
ejected.
Notes:
• If this does not work, try to reset your unit.
• Be careful not to drop the disc when it ejects.
IMPORTANT FOR LASER PRODUCTS
1. CLASS 1 LASER PRODUCT
2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave all
servicing to qualified service personnel.
3. CAUTION: Visible and invisible laser radiation when open and interlock failed or defeated. Avoid
direct exposure to beam.
4. REPRODUCTION OF LABEL: CAUTION LABEL, PLACED OUTSIDE THE UNIT.
SEL (select)
(standby/on attenuator)
(standby/on attenuator)
0 (eject)
EN02-03_KD-G498[UH]f.p65 9/28/04, 2:35 PM 2