JVC HR-A637E - Manual (Page 21)

EN
21
Check And Cancel
Programmes
ACCESS PROGRAMME
DISPLAY
1
Press PROG CHECK. The recording start and stop times
appear on the front display panel. Then press OK and
the date and the channel position appear. Each time
you press PROG CHECK the next program’s informa-
tion appears.
If All Information Is Correct . . .
. . . programming is completed.
If You Wish To Revise Data . . .
. . . with the recorder’s power turned on, go to step 2.
If You Wish To Cancel A Program . . .
. . . with the recorder’s power turned on, press
CANCEL. All information you input is deleted.
REVISE PROGRAMME
INFORMATION
2
Input the appropriate data using the START +/–, STOP
+/–, DATE +/– and TV PROG. +/– buttons on the
remote control.
PDC/VPS Recording
Now available from some TV stations, PDC (Programme Delivery
Control) and VPS (Video Programme System) are service designed
to assure safe, accurate timer recording. With this system, special
code signals are transmitted together with the audio/video
signals. These code signals control your video recorder and have
precedence over advertised times you preset in the timer. This
means that your recorder will start and stop recording when the
preset TV programmes actually start and end — even if the
broadcast time of a preset TV programme is changed.
To Use PDC/VPS Service . . .
The default setting for PDC/VPS is “ON”. To cancel PDC/VPS,
press NUMBER key “7” so that the PDC/VPS indicator (
) on
the display panel disappears during ShowView or regular timer
programming.
NOTES:
● When you manually enter programmes (regular timer
programming), set the start time (PDC or VPS time) exactly as
advertised in the TV listing. A different time than advertised
will result in no recording.
● PDC/VPS recording is also possible when a satellite tuner or a
cable system is connected to AV2 IN on your recorder.