Changing the display brightness, Setting the clock, Turning off the power automatically – JVC DX-T9 User Manual

Page 18

Advertising
background image

16

Changing the Display Brightness

* Except for the RHYTHM AX and KARAOKE SCORING

lamps.

Reducing Power Consumption While on

Standby—ECO Mode

You can reduce the power consumption while the System is
turned off (on standby) by activating the ECO mode.

To activate the ECO mode,

press DIMMER

while the System is turned off (on standby).
The display illumination (including the
display demonstration) disappears.

To deactivate the ECO mode,

press DIMMER again while

the System is turned off (on standby). The display
illumination appears.

Setting the Clock

Without setting the build-in clock, you cannot use any
timers.
• To exit from the clock setting, press CLOCK/TIMER as

required.

• To correct a misentry during the process, press CANCEL.

You can return to the previous step.

1

Activate clock setting mode.

• If you have already adjusted the clock before, press the

button repeatedly until the clock time starts flashing.

2

Adjust the hour, then minute.

Now the built-in clock starts working.

Turning Off the Power Automatically

With Sleep Timer, you can fall asleep while listening to
music.

1

Specify the time (in minutes).

2

Wait until the set time goes off.

To check the time remaining until the shut-off time

• If you press the button repeatedly, you can change the

shut-off time.

DIMMER 1

Dims the display and the illumination
on the main unit*.

DIMMER 2

Dims the display (same as DIMMER 1)
and turns off the illumination on the
main unit*.

Remote
ONLY

DIMMER

DIMMER 1

DIMMER 2

DIMMER OFF

(Canceled)

Remote
ONLY

DIMMER

INFO

Remote
ONLY

CLOCK/

TIMER

SET

Remote
ONLY

SLEEP

10

20

30

60

90

120

150

Canceled

SLEEP

DX_T9[J].book Page 16 Tuesday, December 13, 2005 1:53 PM

Advertising