JVC HR-DD865EK - Manual (Page 63)

63
How To Use
The remote control can operate most of your video
recorder's functions, as well as basic functions of TV sets
and satellite receivers of JVC and other brands.
(
੬
pg. 31, 32)
● Point the remote control toward the sensor window.
● The maximum operating distance of the remote control
is about 8 m.
NOTES:
● When inserting the batteries, be sure to insert in the
correct directions as indicated under the battery cover.
● If the remote control doesn't work properly, remove its
batteries, wait a short time, replace the batteries and then
try again.
* CABLE/SAT Button enables remote control of
connected satellite receiver.
੬
pg. 32,
“Remote Control LCD” in the right column
( STANDBY/ON Button — same as button on
recorder.
) – –:– – (DISPLAY) Button switches display
between clock time, tape remaining time,
counter readings and preset position*.
੬
pg. 13
* Preset position is not displayed during playback.
q TV/VCR Button switches connected TV's mode
between TV and AV.
੬
pg. 10
w REVIEW Button — same as button on recorder.
੬
pg. 23
e 30 SEC Button initiates a 30-second period of
fast-motion playback.
੬
pg. 22
r WEEKLY Button enables timer recording of
weekly serials.
੬
pg. 15, 17
t Button transmits entered VIDEO Plus+ code
to the recorder.
੬
pg. 14
y AUX Button selects recorder's auxiliary input
mode.
੬
pg. 33, 34, 35
u ‰ (TIMER) Button — same as button on re-
corder.
੬
pg. 15, 17
i Auto Tracking Button ( ) enables/disables
auto tracking mode during playback
੬
pg. 19
SP/LP Button selects tape speed.
੬
pg. 12
o OK Button enters selections made in on-screen
menus.
੬
pg. 20
p MENU Button accesses Menu screen.
੬
pg. 20
Q TV PROG +/– Button — same as button on
recorder.
੬
pg. 12
W DATE +/– Button inputs date of programme for
timer recording.
੬
pg. 16
E Fast Forward [FF] Button fast-forwards tape;
initiates high-speed forward search.
੬
pg. 10, 11
R Stop Button — same as button on recorder.
੬
pg. 10
T Pause Button — same as button on recorder.
੬
pg. 11
Y
@ #
Button initiates functions such as Index
Search
੬
pg. 22, variable-speed search, frame
by frame playback.
੬
pg. 11, 24
TV +/–Button controls volume of connected
TV.
੬
pg. 31
Remote Control LCD
The remote control can operate not only the video
recorder but also some of your TV and satellite tuner's
functions. The LCD indicates which of these (VIDEO, TV
or CABLE/SAT) the remote control can currently operate.
When you first purchase the remote control, or after you
have just replaced the batteries, VIDEO A (A code) is
selected.
1 To operate your video recorder, first press the VCR
button to set the remote control to the Video mode.
To switch remote control's A/B code, refer to page 30.
2 To operate your TV, first press the TV button to set the
remote control to the TV mode (
੬
pg. 31).
3 To operate your satellite tuner, first press the CABLE/SAT
button to set the remote control to the Satellite tuner
mode (
੬
pg. 32).
NOTES:
Even if “TV” is displayed on the LCD, the following
operations can be performed without switching the mode.
● Basic operations for the recorder
After an operation is completed, “TV” reappears on the
LCD.
● Express Timer Programming and VIDEO Plus+ Timer
Programming operations
To perform a TV operation again, switch to TV mode
first.
● Accessing main menu
To perform a TV operation again, switch to TV mode
first.