JVC HR-1080-PRO - Manual (Page 13)

JVC HR-1080-PRO Video Processor User Manual MKT-0027-UMN-1.002F
5. Return JVC HR-1080-PRO to Operate Mode by pushing the On/Setup button on the
front panel or the Power button on the IR Remote. This activates the JVC HR-1080-PRO
output circuits. Further adjustments may be made using the JVC HR-1080-PRO OSD
(On Screen Display).
For projection applications where keystone correction is required, continue with the following
steps:
6. If the projector has an AUTOSET or AUTODETECT feature, disable this function.
These projector modes may cause image distortion if a keystone-corrected image is
applied to the projector input.
7. Select the “Advanced” menu from the JVC HR-1080-PRO OSD, then select “Projection”,
and “Horizontal and Vertical Keystone” submenus.
8. Using the up/down arrow keys, select in turn each of the image corner sliders and then
use the left/right arrow keys to move the corner to the desired location on the screen.
Continue adjustments until the projected image matches the target screen geometry.
JVC Inc. Page 13