JVC GR-D201 User Manual

Page 51

Advertising
background image

EN

51

Master Page: Right

AD

V

A

NCED FE

A

TURE

S

To make video clips from recorded video
footage
1

Load a cassette. (

੬ pg. 15)

2

Load a memory card. (

੬ pg. 16)

3

Set the VIDEO/MEMORY Switch to “VIDEO”.

4

Set the Power Switch to “PLAY” while pressing
down the Lock Button located on the switch.

5

Press PLAY (4/9) to start video playback.

6

Press E-MAIL to engage the E-Mail Clip Record-
Standby mode.

● “E-CLIP” appears.

● To cancel E-Mail Clip Recording, press E-MAIL

again or press STOP (8) to stop video
playback.

7

At the point you want to start dubbing, press the
Recording Start/Stop Button to start E-Mail Clip
Recording.

8

Press the Recording Start/Stop Button to stop
E-Mail Clip Recording.

● “COMPLETED” is displayed, then the

camcorder re-enters the E-Mail Clip Record-
Standby mode.

9

Press E-MAIL to end E-Mail Clip Recording. The
normal screen reappears.

To view video clips stored in a memory card…
Refer to “Playback Of Video Clips” (

੬ pg. 25).

To delete unwanted video clips stored in a memory
card…
Refer to “Deleting Files” (

੬ pg. 28).

NOTES:

● Approximate maximum recording time per video

clip is 3 minutes.

● Playback operation cannot be performed during

E-Mail Clip Recording.

● If the end of the tape is reached during E-Mail Clip

Recording, that portion will be automatically
stored in the memory card.

● If the end of the tape is reached in step 6, the

E-Mail Clip Record-Standby mode will be
automatically cancelled.

● The video clip files stored with this camcorder are

compatible with MPEG4. Some MPEG4 files
stored with other devices cannot be played back
with this camcorder.

● 240 x 176 size video clip files made with other

devices or video clip files that are longer than 3
minutes cannot be played back with this
camcorder. “UNSUPPORTED FILE!” is displayed.

● Video noise may appear while viewing video clips

in the LCD monitor or viewfinder, however, this
noise is not present in the actual video clips stored
in the memory card.

● You can also view video clips on your PC by using

Windows

®

Media Player version 6.4 or later.

Refer to the instructions of PC and software.

GR-D200PAL.book Page 51 Monday, June 30, 2003 6:10 PM

Advertising