JVC RM-SR774XU - Manual (Page 40)

37
English
5. Press BALANCE/SURROUND ADJUST repeatedly
until “DSP EFFECT” appears on the display.
The display changes to show the current setting.
6. Turn MULTI JOG to select the effect level, while the
indication of the previous step is still on the display.
As you turn it, the effect level changes as follows:
As the number increases, the selected DAP mode
becomes stronger.
To cancel the DAP mode
Turn MULTI JOG until “DSP OFF” appears in step 2.
The DSP indicator goes off from the display.
BALANCE/ SURROUND
ADJUST
MULTI JOG
Using the DSP Modes
DSP EFFECT 1 DSP EFFECT 2
DSP EFFECT 4
DSP EFFECT 3
DSP EFFECT 5
Note:
Once you have adjusted the
DAP modes, the adjustment is
memorized for each DAP mode.
EN20_46.RX-774P[U]/1 98.3.10, 2:51 PM 37