JVC SR-VD400U - Manual (Page 40)

40
EN TIMER RECORDING (cont.)
Checking program settings
1
Disengage timer
Press TIMER (‰), then press POWER.
● When “AUTO TIMER” (੬ pg. 59) is set to “ON”,
you do not have to press TIMER (‰).
2
Access Program List screen
Press PROG. CHECK.
● The clock must be set
to access the program
list.
If you have not set the
clock, the Main Menu
screen appears after
an error message is
displayed. Refer to page 10 for the clock setting
procedure.
3
Access Program screen
Press %fi to select a program, then press OK to
check more detailed information.
● To return to the normal screen, press PROG.
CHECK.
A
B
VCR
TV
CABLE
/DBS
A
-1
A
-2,3
B
-3
A
-1
B
-4
A
-3
B
-2
B
-2
B
-2
Canceling or changing program
settings
1
Access Program screen
Repeat steps 1 to 3 in the left column.
2
Cancel or change program setting
To cancel a program,
press OK with the
arrow on “CANCEL”,
then press OK with the
arrow on “CONFIRM”.
OR
press CANCEL, then
press OK.
● “PROGRAM CANCELED” appears on the screen,
then press OK to return to the program list.
To change a program, press the appropriate button:
START+/–, STOP+/–, DATE+/–, TV/VCR CH+/–,
DAILY (number “8”), WEEKLY (number “9”) and/or
REC SPEED, then press OK.
● “PROGRAM COMPLETED PRESS [TIMER] TO
ENTER TIMER STANDBY MODE” appears on the
screen, then press OK to return to the program
list.
3
Return to normal screen
Press PROG. CHECK.
4
Reengage timer recording standby mode
Press TIMER (‰).
● When “AUTO TIMER” (੬ pg. 59) is set to “ON”,
the timer recording standby mode automatically
resumes when you turn off the VCR.
PROGRAM CHECK
THEN PRESS [OK]
SELECT WITH ARROW KEYS
SELECT
OK
EXIT
DATE
12/24/03 (WED) 8:00PM – 10:00PM TUE CATV12CH STD (SP)
12/27/03 (SAT) 11:00PM – 11:45PM MON–FRI VCR47CH STD (SP)
12/28/03 (SUN) 10:30PM – 11:45PM MON–FRI DBS110CH STD (SP)
START – STOP DAILY/WEEKLY CH REC SPEED
PROG.CHECK
CONFIRM CANCEL
10:00 PM
STD (SP) WED
12 CH
CATV
8:00 PM
START TIME STOP TIME DATE
DAILY/WEEKLY
CH
SOURCE REC SPEED
SET PROGRAM WITH [+/–, REC SPEED,
8=DAILY, 9=WEEKLY] THEN PRESS "CONFIRM"
START STOP DATE CH EXIT
12/24/03 (WED)
PROG.
TIMER PROGRAM
● Turn on the VCR and the TV, and select the AV
mode on the TV.
● Set the VCR/TV/CABLE/DBS selector on the
Remote to “VCR”.
VD400U-EN34-41 03.7.18, 1:06 PM 40