JVC HR-272EU - Manual (Page 24)

Filename [HRJ670EU2.fm]
Masterpage:Left
24
EN TIMER RECORDING
S
HOW
V
IEW
®
Timer
Programming
With the S HOW V IEW system, timer programming is greatly
simplified because each TV programme has a corresponding
code number which your recorder is able to recognize.
A
Access the S HOW V IEW screen.
The front display panel looks like this:
B
Enter the S HOW V IEW number.
The S HOW V IEW number you enter appears on the front display
panel with only a 4-digit number:
C
Access the S HOW V IEW Program screen.
The front display panel shows the programme start time. Pressing
" changes the display to the programme stop time, then the
date and channel position.
● If the number you entered is invalid, “ERROR” appears on the
TV screen and “Err” appears on the front display panel. Press
& and input a valid S HOW V IEW number.
● If the “GUIDE PROG SET” screen appears, see “ATTENTION”
on page 25.
Before performing the S HOW V IEW Timer
Programming:
● Make sure that the recorder’s built-in clock is set properly.
● Insert a cassette with the safety tab in place. The recorder
will come on automatically.
● Turn on the TV and select the video channel (or AV mode).
Press PROG.
Press the NUMBER keys to
enter the S
HOW V IEW number
of a programme you wish to
record.
● If you make a mistake, press &
and input the correct number.
Press OK, then the
S
HOW V IEW Program screen
appears (if you’re just starting
out, “P1” appears).
IMPORTANT
Make sure the channel position number you wish to record is
displayed; if not, see “S
HOW V IEW ® Setup” on page 47 and set
the Guide Program number correctly.
HRJ670EU2.fm Page 24 Thursday, December 9, 1999 3:50 PM