Jabra CRUISER2 - Manual (Page 6)

5
english
Jabra CrUISEr2
Use only the charger provided in the box – do not use chargers
from any other devices as this may damage your speakerphone .
Please note: The lifetime of the battery will be significantly reduced
if your device is left uncharged for a long period . We therefore
recommend that you recharge your device at least once a month .
tURnInG YoUR sPeAKeRPHone on AnD oFF
- Slide the on/off button to turn the speakerphone on or off
FM
I
O
SLEEP MODE
When disconnected from the phone, the speakerphone turns off
automatically after 10 minutes . Tap answer/end button to turn
the speakerphone on again .
PAIRInG It WItH YoUR PHone
Speakerphones are connected to mobile phones using a procedure
called ‘pairing’ . by following a few simple steps, a phone can be
paired with a speakerphone in a matter of minutes .
1 Put the speakerphone in pairing mode
- When you turn on your Jabra CrUISEr2 for the first time, the
speakerphone will automatically start up in pairing mode – i .e .
it is discoverable for your phone . When the speakerphone is in
pairing mode you will hear the voice announcement “pairing
mode” and the Connection status icon will flash rapidly .